Welcome to ISOMATIC COMPLECT!

UNIVERSAL AND SPECIALIZED PROGRAMMABLE CONTROLLERS чл. 52 от Наредба №3 от 19.02.2010 г. за специфичните изисквания и контрола осъществяван от митническите органи върху средствата за измерване на акцизни стоки, СКИУ, ИКУНК For manufacturing the programmable controlers we use microcontrolers 68HC11, 68HC12 and the latest Freescale 9S12X derivatives. There are developed technical and programmable means for setting, real time system, rich libraries for work with peripheral devices and consumer-orientated programmable language. Programmable modular controller MC5 Тhe modular architecture programmable controller MC5 is designed for automation of mid-range and high-end systems. The possibility to process a large number of input/output signals and the high speed program execution makes it suitable for process control in cases of stringent requirements concerning a large number of various parameters, high tracking and control speed. Programmable controller MC4 MC4 is a programmable logic controller for machines and equipment having medium level of complexity. It is programmed easily via a PC using high-level programming language or directly from the module using the keyboard and the LCD display. Depending on the type of LCD display there are two modifications - both with 6 x 2 alphanumeric display and with 20 x 4 display. 8-channel regulator MC3 MC3 is a process controller. It has PID regulators and 8 available channels for measurement and process control. Programmable controller E203 Compact, multi-purpose controller suitable for low-end or mid-range systems. A considerable range of expansion modules makes E203 suitable for implementation of large information and control structures, having complex topology. It possesses software and communication compatibility with the other controllers of Isomatic Complect. It is also compatible with a number of other industrial systems, due to the support of the ARCNET network protocol. INPUT MODULES FOR PROGRAMMABLE CONTROLLERS Digital inputs module 4DI220Vac The module 4DI220Vac is used to convert AC signals up to 250 Vac to DC digital signals with levels up to 36 Vdc. The module consists of 4 (four) independent channels. All channels have galvanic isolation between the input and the output which allows to connect controllers or other devices without additional components in between. Module analog multiplexer MUXAN12 The module MUXAN12 is a 12-channel analog multiplexer to one output. The module is driven by constant voltage from an external source which makes it suitable for use together with programmable controllers and other control equipment. The use of MUXAN12 can significantly reduce the space and cost of control equipment in case of large number of analog signals. Encoder signal conversion transducer ENCT2 The signal conversion transducer ENCT2 is intended to use simultaneously with encoders with power supply 5Vdc and output signals A, A, B, B, C and C. OUTPUT MODULES FOR PROGRAMMABLE CONTROLLERS Modular transistor switches FET2x2N, FET2x4N The modules FET2x2N and FET2x4N contain 4 and 8 transistor constant current switches respectively. They are designed to commutate huge electrical loads, driven by constant voltage in the range from 18 Vdc to 36 Vdc. Transistor outputs module FET4B The module FET4B contains 2 transistor constant current switches of NPM type (common plus for the load) and 2 transistor constant current switches of PNP type (common minus for the load). The four switches have common power supply. Relay output module REL5 The relay output module REL5 contains 5 (five) electromechanical switches. The power switching element is an electromechanical relay. It is used to commutate AC and DC loads. Every switch has one normally open and one normally closed contact which have a common terminal. AC output module SSR8E The AC output module SSR8E consists of 8 (eight) independent electronic AC switches. It is used to commutate electrical loads up to 440W each with line voltage 220V/50Hz. AC output module SSR2x3 The AC output module SSR2X3 consists of 6 (six) electronic power AC switches, separated in two groups of 3 switches. It is used to commutate two three-phase motors up to 750W each, with line voltage 380V/50Hz. The module can commutate also other three-phase loads with maximum current 2A for each phase. Module for reversing asynchronous motors SSR3R The module SSR3R is an electronic module used to commutate and reverse 3-phase asynchronous motors up to 750W, powered by 380VAC mains voltage. The use of electronic components instead of mechanical switches makes it especially suitable for applications needing frequent commutating and reversing of asynchronous motors. COMMUNICATION MODULES Interface transmitter CRS485 The module CRS485 is an interface transmitter between the serial data interconnection standards RS232 and RS485. It can be used to make a connection between two devices with different interfaces, as well as for implementation of “MASTER SLAVE” type networks. Interface signal amplifier REP485 The module REP485 is an amplifier of interface signals used by serial data interconnection standard RS485. It is intended to amplify signals when building networks comprising of many devices or long data lines. Usually this is necessary when the number of the devices in one segment of the network is bigger than 32 or the length of the line id more than 1 km. TRANSMITTERS Sensor signal transmitters CCA/CCB/CCC/CCD/CCN The sensor signal transmitters CCX transform the signal from measurement analogue sensors (thermistors, etc.) in a standard signal 4-20mA. Frequency-to-voltage converter module TACHO 2 The module TACHO 2 is used for linear conversion of signals with frequencies from 0 to 1 kHz into signals with voltages from 0 to 10V. Loop powered galvanic isolator PGR2 The passive galvanic isolator is a device which separates electrically the input from the output signal. POWER SUPPLY DEVICES Power supply unit P24V01 Модулът P24V01 представлява маломощно импулсно захранване преобразуващо входни напрежения от 90Vac/dc до 220Vac/dc в постоянно напрежение 24Vdc, галванично разделено от входното. Power supply unit P2x24V/1A Specifications: Input voltage: Nominal value: 220 Vac / 320 Vdc Minimum value: 165 Vac / 85 Vdc Maximum value: 265 Vac / 350 Vdc Power supply unit P3x24V/1.5A Specifications: Input voltage: Nominal value: 220 Vac / 320 Vdc Minimum value: 135 Vac / 135 Vdc Maximum value: 265 Vac / 350 Vdc AC and DC SOLID STATE RELAYS (SSR) AC output single phase solid state relays SSRXXAB Solid state relays SSR10/20/40 are electronic power a.c. switches. They are designed to commutate huge electric loads (up to 2,2/4,4/8,8 kW), supplied by mains voltage 220V/50HZ. AC double solid state relays SSR2X10Y Solid-state relays SSR2X10Y, YN are electronic power a.c. switches. They are designed to commutate huge electrical loads (up to 2x2.2kW), powered by mains voltage 220V/50Hz. DC solid state relays SSR25D The solid-state relay SSR25D is an electronic power DC switch. It is designed to commutate huge electrical loads (up to 25A), driven by constant voltage of 24/36/48Vdc. SOFTWARE SCADA SYSTEM Programming packages for workstations (WS) The workstations (WS) developed in Isomatic Complect are applications for Windows with object orientated graphical man-machine interface (MMI) which are included in systems for observation, control and management of continuous and discreet processes in industry. CONTROLLER'S PROGRAMMING IC - user's language for the programmable controllers The program devices developed in Isomatic Complect give the user an opportunity for flexible configuration and building up of complete management and control systems. The hierarchical structure of the software allows programming of separate elements of one system as well as the whole system's adjustment. Realisations: ЛУКОЙЛ - НЕФТОХИМ, Бургас. СИСТЕМА ЗА АВТОМАТИЗИРАНО УПРАВЛЕНИЕ НА ЕЛЕКТРОЕНЕРГИЙНИ ОБЕКТИ СИСТЕМА ЗА КОНТРОЛ НА ТЕМПЕРАТУРИ И НАЛЯГАНИЯ НА ТУРБОГЕНЕРАТОРИ ТГ1-ТГ6 В ТЕЦ АВТОМАТИЗИРАНА СИСТЕМА ЗА ОПТИМИЗАЦИЯ НА ТЕХНОЛОГИЧНИТЕ РЕЖИМИ В ПРОИЗВОДСТВО ТЕЦ ТЕЛЕМЕХАНИЧНА СИСТЕМА НА ЕТИЛЕНОПРОВОД И НЕФТОПРОВОД БУРГАС-ДЕВНЯ КЦМ, Пловдив. ИНФОРМАЦИОННО-УПРАВЛЯВАЩА СИСТЕМА НА ИНСТАЛАЦИЯ ЗА ФИЛТРУВАНЕ НА КЕКОВЕТЕ ВЪВ ФИЛТРУВАЛНO-СУШИЛНО ОТДЕЛЕНИЕ НА КЦМ ИНФОРМАЦИОННО-УПРАВЛЯВАЩА СИСТЕМА НА ИНСТАЛАЦИЯ ЗА ПРАХОУЛАВЯНЕ НА ФИЛТРИ ФРИРТ-1040 ИНФОРМАЦИОННО-УПРАВЛЯВАЩА СИСТЕМА НА ПРИЕМНИ УСТРОЙСТВА ЗА ВЕЛЦ И ФЛЮМИНГ ОКИСИ В УЧАСТЪК "МОКРО ИЗВЛИЧАНЕ" К-20 ИНФОРМАЦИОННО-УПРАВЛЯВАЩА СИСТЕМА НА ИНСТАЛАЦИЯ ЗА ФИЛТЪР ФРИРТ-660 ЗА ОТДЕЛЕНИЕ "ЦИНКОВ ПРАХ" ИНФОРМАЦИОННО-УПРАВЛЯВАЩА СИСТЕМА НА ИНСТАЛАЦИЯ ЗА ПРАХОУЛАВЯНЕ НА ФИЛТЪР УРФМ ТОПЛОФИКАЦИЯ ЕАД, Пловдив АВТОМАТИЗИРАНА СИСТЕМА ЗА УПРАВЛЕНИЕ НА ТЕХНОЛОГИЧНИТЕ РЕЖИМИ УПРАВЛЕНИЕ НА БОЙЛЕР КОНДЕНЗАТОР НА ТГ-2 СИСТЕМА ЗА РАДИОУПРАВЛЕНИЕ НА ПОМПЕНА СТАНЦИЯ “МАРИЦА” СИСТЕМА ЗА МОНИТОРИНГ НА ВРЕДНИТЕ ЕМИСИИ ИЗПУСКАНИ ВЪВ ВЪЗДУХА АСЕНОВА КРЕПОСТ АД, Асеновград СИСТЕМА ЗА УПРАВЛЕНИЕ НА КОНФЕКЦИОНИРАЩА ЛИНИЯ ЗА КАЛЪФИ БУТИЛКООБРАЗНИ УПРАВЛЕНИЕ НА МАШИНА "ТУНИСАК" СИСТЕМА ЗА УПРАВЛЕНИЕ НА ЕКСТРУДЕР СИСТЕМА ЗА УПРАВЛЕНИЕ ДОЗИРАНЕТО НА ИНСТАЛАЦИЯ ЗА БОПП ФОЛИО ПИРИНПЛАСТ, Гоце Делчев СИСТЕМА ЗА УПРАВЛЕНИЕ НА ДВЕ ЕКСТРУДЕРНИ ЛИНИИ ЗА ПОЛИПРОПИЛЕНОВО ВЕЛПАПЕ УПРАВЛЕНИЕ НА ЛИНИЯ ЗА ПРОИЗВОДСТВО НА СЕПАРАТОРИ ЗА АКУМУЛАТОРИ РУБЕЛА АД, Рудозем СИСТЕМА ЗА УПРАВЛЕНИЕ НА БЛАСТАВТОМАТ ЗИТО ЕООД, Пловдив СИСТЕМА ЗА УПРАВЛЕНИЕ НА БЛАСТАВТОМАТ БУНАЙ ООД, Панагюрище СИСТЕМА ЗА УПРАВЛЕНИЕ НА ШПРИЦАВТОМАТ АРЕКСИМ ЕООД, Смолян УПРАВЛЕНИЯ ЗА ТЕРМОНАГРЯВАНЕТО НА ШПРИЦФОРМИ С ТОПЛИ ЛЕЯЦИ СИСТЕМА ЗА ЛОКАЛНО И ЦЕНТРАЛИЗИРАНО УПРАВЛЕНИЕ НА 6 ШПРИЦАВТОМАТА КЛОНДАЙК ООД с. Труд. СИСТЕМА ЗА УПРАВЛЕНИЕ НА ЛИНИЯ ЗА РЯЗАНЕ НА ХАРТИЕНИ ЧУВАЛИ ПО РАЗМЕР И МАРКЕР ФИЛКАБ АД, Пловдив. УПРАВЛЕНИЕ НА МАШИНА ЗА НАВИВАНЕ НА КАБЕЛИ КАУЧУК АД Пазарджик. СИСТЕМА ЗА УПРАВЛЕНИЕ НА ЛИНИЯ ЗА ПРОИЗВОДСТВО НА КАУЧУКОВИ ЛЕНТИ ТИС-МАШИНИ ООД гр. Смолян УПРАВЛЕНИЕ НА МАШИНА ЗА ЗАТОЧВАНЕ НА АБРИХТ НОЖОВЕ УПРАВЛЕНИЕ НА МАШИНА ЗА ЗАТОЧВАНЕ НА ЦИРКУЛЯРИ С ТВЪРДОСПЛАВНИ ПЛАСТИНИ САМ-КИНТИ гр. Пазарджик. УПРАВЛЕНИЕ НА ЛИНИИ ЗА ХРАНИТЕЛНО ВКУСОВАТА ПРОМИШЛЕНОСТ СТИКО 90 гр. Пловдив. УПРАВЛЕНИЕ НА РАЗРОЛВАЩА МАШИНА ХЪС ООД гр. Пловдив СИСТЕМА ЗА УПРАВЛЕНИЕ НА ЛИНИЯ ЗА НАПРЕЧЕН РАЗКРОЙ НА МЕТАЛНИ ЛИСТОВЕ СИСТЕМА ЗА УПРАВЛЕНИЕ НА ЛИНИИ ЗА СТУДЕНООГЪНАТИ ПРОФИЛИ СИСТЕМА ЗА УПРАВЛЕНИЕ НА ЛИНИЯ ЗА ЗАВАРЕНИ ТРЪБИ ТЕЦ БОБОВДОЛ. СИСТЕМА ЗА НЕУТРАЛИЗАЦИЯ НА ОТПАДНИ ВОДИ КРАЙБУРГ - БЪЛГАРИЯ. СИСТЕМА ЗА УПРАВЛЕНИЕ НА ЛИНИЯ ЗА ПРОИЗВОДСТВО НА СУРОВА ГУМА ALPINE - MAYREDER Bau GmbH - VACHA CASCADE / BULGARIA СИСТЕМА ЗА МОНИТОРИНГ НА МРЕЖОВО НАПРЕЖЕНИЕ СИСТЕМА ЗА РАДИОУПРАВЛЕНИЕ НА КАБЕЛКРАН СИСТЕМА ЗА МОНИТОРИНГ НА РЕЛЕЙНИ СИГНАЛИ НА КАБЕЛКРАН АВТОМАТИЧНА СИСТЕМА ЗА ИНДИКАЦИЯ НА БЕТОН

Dear customers,

• If you are working in the field of automatization, electrical equipment or machine-building and you need components, devices and systems to increase the value of your products  →  you can find in our face a valuable partner.
• If you design new machines, lines or productions  →  we can help you with the design and manufacturing of the managing/controlling part.
• If your machine is old and needs modernizing and increasing the efficiency  →  we can do it.
• If you are having problems with your electrical equipment and installations  →  our professional employees will help you solving them.
• If you need a research, opinion, advice or delivery of electrical equipment, components and automation systems  →  we will help you.
• If you are an old client of ours  →  you can find information about our new products and services.

Good luck!